¶ Wall Cabinets - Limitation may change, check DS for final limit
General Limitations:
- Door Ratio: Door width divided by Door height, must be less than 1.5
- Single Swing Door Maximum Width: 30"
- For Wall Cabinets over 42" in Width, the Vertical Partition will appear in the middle of the cabinet.
- LED front is NOT available for tip on or glass door with Salice Air hinge
- When the Wall Mounting Bracket is selected, the cabinet back panel will be inset ¾", and the minimum cabinet height needs to be 8" for the hanging bracket installation.
¶ With Door
 |
| WALL |
|
¶ With Lift Door
 |
*Note: For Wall_HF Cabinets, sufficient space above the cabinet is necessary to ensure proper door clearance during opening. In low-ceiling scenarios or when space above the cabinet is limited, the HF hardware arm can be adjusted to stop at a specific angle. Please note that if the HF door is not fully opened, the customer will not have complete access to the cabinet's interior. Refer to the picture below for guidance on calculating the required clearance. 
|
| WALL_HF | |
|
 |
| WALL_HK |
|
¶ For Corner
 |
 |
 |
 |
| WALL_OPEN BOX CORNER | WBLINDL | WBLINDR | WCORSQ |
|
|
|
|
¶ Open Box
|
|
 |
| WALL_OPEN BOX CORNER | WALL_OPEN BOX |
|
|
¶ For Hood
 |
 |
| Hood Cover Cabinet | Wall_Man Lift_Hood Cabinet ONLY |
|
|
 |
|
¶ Over Counter
  |
 |
| WALL_HL (with regular shelf) | WALL_HL (with Pullout shelf) |
|
|