LED installed on the left/right side panel inside the cabinet will have a 30mm inset (from the outside edge) on both the top and bottom ends, covered with an LED end cap. This helps prevent the top and bottom panels from chipping during cabinet assembly.
Floating Shelf LED: ~¾" (20mm) inset on both ends, allowing the LED wire to route to the back of the shelf.
LED on the cabinet horizontal panels (top, bottom, and fixed shelf), the LED channel will be cut through from end to end on the bottom panel without inset.
Panel LED (PNL_HORI, ), LED channel will be cut through from end to end on the bottom panel, without inset.