¶ Curved End Unit
- Curved Toe-kick & Molding currently NOT available.
- Curved End Units cannot be trimmed during installation. Caulking may be required to fill any gaps between the unit and the wall.
¶ Curved End Open Box
¶ Finish Limitation
- All slab materials, except Paint/Stain materials
¶ Size Limitation
- Height: 9" - 95"
- Depth/Width: Minimum 12", at least one side needs to be less than 16"
¶ Corner Radius
- 4" to 14" Radius, with 2" increment
- Radius available based on the size of the panel.
¶ Curved End Column
Note: Toe-Kick Leveler Option is NOT available on the Curved End Column.
¶ Finish Limitation
- Available with Finish:
- PET Matte Finish (Finish Code: EMBxxxx)
- Wood Veneer Finish (Finish Code: VTDxxxx)
- 10 Sheen Clear Coat Finish (SMD1011_Rift White Oak_10 Sheen and SMD1012_Walnut_10 Sheen)
- Vertical Grain Only
¶ Size Limitation
- Height: 18" - 36"
- Depth: 12" - 30"
- Width:
- Minimum: 6 ¾" (w/ 4" Radius)
- Maximum: 15"
¶ Corner Radius
- 4" to 12" Radius, with 2" increment
- Radius available based on the size of the panel.
¶ Island Curved End Column
¶ Finish Limitation
- Only available with PET Matte Finish (Finish Code: EMBxxxx) & Wood Veneer Finish (Finish Code: VTDxxxx)
- Vertical Grain Only
¶ Size Limitation
- Height: 18" - 36"
- Depth: 12" - 30"
- Width:
- Minimum: 6 ¾" (w/ 4" Radius)
- Maximum: 15"
¶ Corner Radius
- 4" to 12" Radius, with 2" increment
- Radius is available based on the size of the panel.
¶ Curved Countertops
If you’d like to apply a corner countertop, please note that nosing is not available for this method. To simulate the appearance of a nosing, you’ll need to extend the countertop manually.
