¶ Feature Overview
Under Shelf LED
¶ Availability
- Available for Wall Cabinets, Open Cabinets, and Tall Cabinets.
- Only available when the cabinet internal configuration is set to "FIXED_SHELVES."
- Currently NOT available when the Side LED is selected.
- For the Tall Cabinets cabinet, the Shelf LED will only appear when the cabinet internal configuration is set to "FIXED_SHELVES."
- Rule Detection Warning message has been set up when:
- Shelf LED has been selected, but the cabinet internal configuration is NOT set to "FIXED_SHELVES."
- Shelf LED has been selected, but the cabinet “Top LED” is NOT selected.
- Rule Detection Warning message has been set up when:
- Note: We will only provide the cut-out on the bottom panel for the LED channel. The installer will need to drill a hole on the cabinet side at the job site to connect the LED wiring.
¶ How To Apply in Design Studio
- Make sure the cabinet Internal Option has been selected as “FIXED SHELVES”
- Go to “Resource Manager”
- Locate the cabinet that needs the modification
- open the drop-down menu for “Wall Space”, and select the “FIXED SHELVES”
- On the right-hand side, go to “Parameters”
- You will see the option to select the “Bottom LED”
- LED location can be selected as Front, Middle, or Back
