¶ What is Rule Detection
- Rules Detecting is a very important tool in Design Studio to help all designers to make sure the accuracy of the design.
- By clicking on the Warning/Error message, you can navigate to the item which trigger the Warning/Error message.
- For Rule Detection Training Video please see link: https://wiki.ronbow.com/en/designstudio#rule-detection
ERROR
- Design errors
- Design file can NOT be submitted if there is error message in Rules Detecting
WARNING
- Possible design errors
- Please CHECK the warning message before submitting your drawing
¶ General Rules ERROR
¶ Room Name Check
- We require each room to have a proper name for the further construction. Before submitting the review form, if the room shows in unnamed, the error would pop out.
- Give the room a proper name: Kitchen, Living spec, Closet, etc
¶ LED Profile Check
- The discontinued LED profile cannot be used in the new orders and cannot be used with the new LED profile at the same time.
- Change the LED profile to the recommended profile
¶ Wall Gola & Bottom Up
- When the “Wall Gola ” option is applied to a wall cabinet, no recess is allowed.
- Change the Wall Bottom Up to 0” or delete the wall gola feature
¶ Overhang Stack Check
- If the cabinet is selected with the bottom overhang feature, it cannot stack on the other cabinet
- Select the bottom overhang to “NONE”
¶ Drawer Box type check
Change the drawer box type to the same
¶ Servo Drive check
If servo drive is selected, minimum width of cabinet is 13'', minimum depth of cabinet is 12''
¶ Deprecated Style
- The cabinet or feature chosen is discontinued
- Change the cabinet or feature
¶ WCORSQ with Limitation
¶ General Rules WARNING
¶ Divider and Side LED warning
- If the cabinet has divider, when select the Side LED feature, the LED only shows on side but NOT on the divider
¶ LED Alignment
- When select the bottom LED for both floating shelf and wall cabinet, because of the different depth of the bottom shelf, the LED distance might be different though they're both selected the Front position
- Select the Back position so the LED distance is counting from the back
- Adjust the LED distance so they can match in same position
¶ Wall Filler Check
- The finish of the wall filler is inconsistent with the wall cabinet
- Change the color to the recommend one of the filler to match the cabinet
¶ Adjacent Cabinets should have the Same Depth
- Equalized the cabinets to have the same depth
¶ NO Hinge Check
- Reminder the cabinet choose has no hinge
¶ Drawer Box Color Match
- Check if the drawer box colors are same.
- Change the drawer box color to the recommended one to match with other cabinet drawer boxes.
¶ Color Front Check
- The cabinet Color Front is the only one inconsistent with the other cabinet.
- Change the chosen cabinet front color to the same as the other cabinets
¶ Push Open Check
- The Cabinet do not Push open feature but other cabinet are all push opened
- Add the push open feature or deleted all the push open feature for all cabinet
¶ Case Height Check
- The cabinet has inconsistent height with other cabinets.
- Equalize the cabinet heights in same
¶ Case Color Check
Change the chosen cabinet case color to the recommended one to match with other cases
¶ Reveal Check for base cabinet
The reveal is inconsistent with either right or left. Reveals should only be changed if you are stacking cabinets, have a wall cabinet on top of a counter
Change the overhang in reveal to “ no overhang ”
¶ Toe kick height
- Toe kicks height mismatch.
- Equalize the toe kicks heights
¶ Gola Finish Check
- Gola Color consistent check.
- Change to the recommended finish to match all gola in same finish.
¶ Shaker Profile Check
- The Cabinet has inconsistent Shaker profiles with other cabinets
- Change the shaker door profiles to the recommended one to match the other cabinets
¶ LED Color Check
- This LED Color is inconsistent with the other LED on cabinet.
- Change LED color to the recommend one
¶ Wall Bottom Up Check
- The Cabinet has inconsistent Wall Bottom Up with the others
- Change the wall bottom up to the recommend number to match with other cabinets
¶ Real-time Rules ERROR
¶ T1D Top LED
- When selecting the side led for the T1D cabinet, the top LED should be selected at the same time to keep the vision style.
- Select the top LED feature of the cabinet
¶ Fixed Shelf LED Check
- Side LED cannot be enabled simultaneously with the shelf LED.
- Disable either the Side LED of the main cabinet or the Bottom LED of Shelf
¶ Wall Open Stack Check
- When the wall open box is empty, the depth of cabinet should be less than 14" to hang on the wall
- Stack the cabinet on the top of another cabinet or reduce the depth to less than 14"
¶ Door Bottom Extend Down Check
- There is not Enough clearance for the door extended down feature. The minimum space of the clearance is ½ "
- Reduce the door bottom extend size to have at least ½" clearance space
¶ Glass Shelf Option Limitation
- The Glass shelf feature can only go with the Glass door. The glass shelf cannot go with other types of doors.
- Change the door to glass door or change the shelf finish
¶ Real-time Rules WARNING
¶ T1D LED Check
- For T1D & T2D cabinet, if select the Fix Shelf LED feature, the shelf must change to the fixed shelves
- Change the shelf to fixed shelves
